*BASH User Commands Ubuntu 10.04.4 LTS Server coreutils
LSHW(1)                                                                LSHW(1)

       lshw - list hardware

       lshw [ -version ]

       lshw [ -help ]

       lshw [ -X ]

       lshw  [ -html | -short | -xml | -businfo ] [ -class class ... ] [ -dis-
       able test ... ] [ -enable test ... ] [  -sanitize  ]  [  -numeric  ]  [
       -quiet ]

       lshw  is  a  small tool to extract detailed information on the hardware
       configuration of the machine. It can report exact memory configuration,
       firmware version, mainboard configuration, CPU version and speed, cache
       configuration, bus speed, etc. on DMI-capable x86 or IA-64 systems  and
       on some PowerPC machines (PowerMac G4 is known to work).

       It  currently  supports  DMI  (x86 and IA-64 only), OpenFirmware device
       tree (PowerPC only), PCI/AGP, CPUID (x86), IDE/ATA/ATAPI, PCMCIA  (only
       tested on x86), SCSI and USB.

              Displays the version of lshw and exits.

       -help  Displays the available command line options and quits.

       -X     Launch the X11 GUI (if available).

       -html  Outputs the device tree as an HTML page.

       -xml   Outputs the device tree as an XML tree.

       -short Outputs  the  device tree showing hardware paths, very much like
              the output of HP-UX's ioscan.

              Outputs the device list showing bus information, detailing SCSI,
              USB, IDE and PCI addresses.

       -class class
              Only  show the given class of hardware. class can be found using
              lshw -short or lshw -businfo.

       -C class
              Alias for -class class.

       -enable test

       -disable test
              Enables or disables a test. test  can  be  dmi  (for  DMI/SMBIOS
              extensions),  device-tree  (for  OpenFirmware  device tree), spd
              (for memory Serial Presence  Detect),  memory  (for  memory-size
              guessing  heuristics),  cpuinfo  (for kernel-reported CPU detec-
              tion), cpuid (for CPU  detection),  pci  (for  PCI/AGP  access),
              isapnp (for ISA PnP extensions), pcmcia (for PCMCIA/PCCARD), ide
              (for IDE/ATAPI), usb (for USB devices),scsi (for SCSI)  or  net-
              work (for network interfaces detection).

       -quiet Don't display status.

              Remove   potentially   sensible   information  from  output  (IP
              addresses, serial numbers, etc.).

              Also display numeric IDs (for PCI and USB devices).

       lshw currently does not detect Firewire(IEEE1394) devices.

       Not all architectures supported by GNU/Linux are fully supported  (e.g.
       CPU detection).

       "Virtual"  SCSI  interfaces  used  for  SCSI emulation over IDE are not
       reported correctly yet.

       lshw must be run as super user or it will only report partial  informa-




              A  list  of  all  known PCI ID's (vendors,  devices, classes and

              Used to access the configuration of  installed  PCI  busses  and

              Used  to  access  the  configuration of installed IDE busses and

       /proc/scsi/*, /dev/sg*
              Used to access the configuration of installed SCSI devices.

              Used on x86 platforms to access CPU-specific configuration.

              Used on PowerPC platforms to access OpenFirmware configuration.

              Used to access the configuration of  installed  USB  busses  and

       /sys/* Used  on  2.6  kernels  to  access hardware/driver configuration

       lshw -short
              Lists hardware in a compact format.

       lshw -class disk -class storage
              Lists all disks and storage controllers in the system.

       lshw -html -class network
              Lists all network interfaces in HTML.

       lshw -disable dmi
              Don't use DMI to detect hardware.

       /proc/*, linuxinfo(1), lspci(8), lsusb(8)

       lshw is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)  version

       lshw is maintained by Lyonel Vincent <lyonel@ezix.org>.

       The webpage for lshw is at

$Rev: 1913 $                   27 February 2008                        LSHW(1)