*BASH User Commands Ubuntu 10.04.4 LTS Server coreutils
AGETTY(8)                                                            AGETTY(8)

       getty - alternative Linux getty

       getty  [-8ihLmnUw]  [-f  issue_file]  [-l  login_program] [-I init] [-t
       timeout] [-H login_host] port baud_rate,...  [term]
       getty [-8ihLmnw] [-f issue_file] [-l login_program] [-I init] [-t time-
       out] [-H login_host] baud_rate,...  port [term]

       getty  opens  a  tty  port,  prompts  for  a login name and invokes the
       /bin/login command. It is normally invoked by init(8).

       getty has several non-standard features that are useful for  hard-wired
       and for dial-in lines:

       o      Adapts  the tty settings to parity bits and to erase, kill, end-
              of-line and uppercase characters when it  reads  a  login  name.
              The  program can handle 7-bit characters with even, odd, none or
              space parity, and 8-bit characters with no parity. The following
              special  characters  are  recognized: @ and Control-U (kill); #,
              DEL and back space (erase); carriage return and line  feed  (end
              of line).

       o      Optionally  deduces the baud rate from the CONNECT messages pro-
              duced by Hayes(tm)-compatible modems.

       o      Optionally does not hang up when it is given an  already  opened
              line (useful for call-back applications).

       o      Optionally does not display the contents of the /etc/issue file.

       o      Optionally   displays  an  alternative  issue  file  instead  of

       o      Optionally does not ask for a login name.

       o      Optionally invokes  a  non-standard  login  program  instead  of

       o      Optionally turns on hard-ware flow control

       o      Optionally  forces the line to be local with no need for carrier

       This program does not use the /etc/gettydefs (System  V)  or  /etc/get-
       tytab (SunOS 4) files.

       port   A  path  name relative to the /dev directory. If a "-" is speci-
              fied, getty assumes that its standard input is already connected
              to a tty port and that a connection to a remote user has already
              been established.

              Under System V, a "-" port argument  should  be  preceded  by  a

              A  comma-separated  list  of  one  or more baud rates. Each time
              getty receives a BREAK character it advances through  the  list,
              which is treated as if it were circular.

              Baud  rates should be specified in descending order, so that the
              null character (Ctrl-@) can also be used for baud  rate  switch-

       term   The  value  to  be  used for the TERM environment variable. This
              overrides whatever init(8) may have set,  and  is  inherited  by
              login and the shell.

       -8     Assume  that the tty is 8-bit clean, hence disable parity detec-

       -h     Enable hardware (RTS/CTS) flow control. It is  left  up  to  the
              application  to  disable software (XON/XOFF) flow protocol where

       -i     Do not display the contents  of  /etc/issue  (or  other)  before
              writing  the  login prompt. Terminals or communications hardware
              may become confused when receiving lots of  text  at  the  wrong
              baud  rate; dial-up scripts may fail if the login prompt is pre-
              ceded by too much text.

       -f issue_file
              Display the contents of issue_file instead of /etc/issue.   This
              allows  custom  messages to be displayed on different terminals.
              The -i option will override this option.

       -I initstring
              Set an initial string to be sent to  the  tty  or  modem  before
              sending  anything  else. This may be used to initialize a modem.
              Non printable characters may be sent by writing their octal code
              preceded  by  a  backslash  (\).  For example to send a linefeed
              character (ASCII 10, octal 012) write \012.

       -l login_program
              Invoke the specified login_program instead of /bin/login.   This
              allows the use of a non-standard login program (for example, one
              that asks for a dial-up password or that uses a different  pass-
              word file).

       -H login_host
              Write the specified login_host into the utmp file. (Normally, no
              login host is given, since getty is  used  for  local  hardwired
              connections and consoles. However, this option can be useful for
              identifying terminal concentrators and the like.

       -m     Try to extract the baud rate the CONNECT status message produced
              by Hayes(tm)-compatible modems. These status messages are of the
              form: "<junk><speed><junk>".  getty assumes that the modem emits
              its  status  message  at  the  same speed as specified with (the
              first) baud_rate value on the command line.

              Since the -m feature may fail  on  heavily-loaded  systems,  you
              still should enable BREAK processing by enumerating all expected
              baud rates on the command line.

       -n     Do not prompt the user for a login name. This  can  be  used  in
              connection with -l option to invoke a non-standard login process
              such as a BBS system. Note that with the -n option,  getty  gets
              no  input  from  user who logs in and therefore won't be able to
              figure out parity, character size, and newline processing of the
              connection.  It  defaults to space parity, 7 bit characters, and
              ASCII CR (13) end-of-line character.  Beware  that  the  program
              that getty starts (usually /bin/login) is run as root.

       -t timeout
              Terminate  if no user name could be read within timeout seconds.
              This option should probably not be used with hard-wired lines.

       -L     Force the line to be a local  line  with  no  need  for  carrier
              detect. This can be useful when you have a locally attached ter-
              minal where the serial line does not set the carrier detect sig-

       -U     Turn  on support for detecting an uppercase only terminal.  This
              setting will detect a login name  containing  only  capitals  as
              indicating  an uppercase only terminal and turn on some upper to
              lower case conversions.  Note that this has no support  for  any
              unicode characters.

       -w     Wait  for  the  user or the modem to send a carriage-return or a
              linefeed character before sending the /etc/issue (or other) file
              and  the  login  prompt.  Very  useful in connection with the -I

       This section shows examples for the process field of an  entry  in  the
       /etc/inittab  file.   You'll have to prepend appropriate values for the
       other fields.  See inittab(5) for more details.

       For a hard-wired line or a console tty:
            /sbin/getty 9600 ttyS1

       For a  directly  connected  terminal  without  proper  carriage  detect
       wiring:  (try this if your terminal just sleeps instead of giving you a
       password: prompt.)
            /sbin/getty -L 9600 ttyS1 vt100

       For a old style dial-in line with a 9600/2400/1200 baud modem:
            /sbin/getty -mt60 ttyS1 9600,2400,1200

       For a Hayes modem with a fixed 115200 bps  interface  to  the  machine:
       (the  example  init string turns off modem echo and result codes, makes
       modem/computer DCD track modem/modem DCD, makes a DTR drop cause a dis-
       connection and turn on auto-answer after 1 ring.)
            /sbin/getty -w -I 'ATE0Q1&D2&C1S0=1\015' 115200 ttyS1

       The issue-file (/etc/issue or the file set with the -f option) may con-
       tain certain escape codes to display the system  name,  date  and  time
       etc.  All  escape codes consist of a backslash (\) immediately followed
       by one of the letters explained below.

       b      Insert the baudrate of the current line.

       d      Insert the current date.

       s      Insert the system name, the name of the operating system.

       l      Insert the name of the current tty line.

       m      Insert the architecture identifier of the machine, eg. i486

       n      Insert the nodename of the machine, also known as the hostname.

       o      Insert the NIS domainname of the machine.

       O      Insert the DNS domainname of the machine.

       r      Insert the release number of the OS, eg. 1.1.9.

       t      Insert the current time.

       u      Insert the number of current users logged in.

       U      Insert the string "1 user" or "<n> users" where <n> is the  num-
              ber of current users logged in.

       v      Insert the version of the OS, eg. the build-date etc.

       Example: On my system, the following /etc/issue file:

              This is \n.\o (\s \m \r) \t

       displays as

              This is thingol.orcan.dk (Linux i386 1.1.9) 18:29:30

       /var/run/utmp, the system status file.
       /etc/issue, printed before the login prompt.
       /dev/console, problem reports (if syslog(3) is not used).
       /etc/inittab, init(8) configuration file.

       The  baud-rate detection feature (the -m option) requires that getty be
       scheduled soon enough after completion of a dial-in call (within 30  ms
       with  modems that talk at 2400 baud). For robustness, always use the -m
       option in combination with a multiple baud rate command-line  argument,
       so that BREAK processing is enabled.

       The  text  in  the  /etc/issue file (or other) and the login prompt are
       always output with 7-bit characters and space parity.

       The baud-rate detection feature (the -m option) requires that the modem
       emits its status message after raising the DCD line.

       Depending  on how the program was configured, all diagnostics are writ-
       ten to the console device  or  reported  via  the  syslog(3)  facility.
       Error  messages  are  produced  if the port argument does not specify a
       terminal device; if there is no utmp  entry  for  the  current  process
       (System V only); and so on.

       W.Z. Venema <wietse@wzv.win.tue.nl>
       Eindhoven University of Technology
       Department of Mathematics and Computer Science
       Den Dolech 2, P.O. Box 513, 5600 MB Eindhoven, The Netherlands

       Peter Orbaek <poe@daimi.aau.dk>
       Linux port and more options. Still maintains the code.

       Eric Rasmussen <ear@usfirst.org>
       Added -f option to display custom login messages on different terminals.

       The getty command is part of the util-linux-ng package and is available
       from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.