*BASH User Commands Ubuntu 10.04.4 LTS Server coreutils
CFDISK(8)                  Linux Programmer's Manual                 CFDISK(8)

       cfdisk - Curses/slang based disk partition table manipulator for Linux

       cfdisk  [-agvz]  [-c  cylinders]  [-h heads] [-s sectors-per-track] [-P
       opt] [device]

       cfdisk is a curses/slang based program for partitioning any  hard  disk
       drive.  Typical values of the device argument are:

              /dev/hda [default]

       In order to write the partition table cfdisk needs something called the
       `geometry' of the disk: the number of `heads' and the number  of  `sec-
       tors  per  track'. Linux does not use any geometry, so if the disk will
       not be accessed by other operating systems, you can safely  accept  the
       defaults  that  cfdisk  chooses for you. The geometry used by cfdisk is
       found as follows. First the partition table is examined,  to  see  what
       geometry  was used by the previous program that changed it. If the par-
       tition table is empty, or contains garbage, or does not point at a con-
       sistent  geometry, the kernel is asked for advice. If nothing works 255
       heads and 63 sectors/track is assumed. The geometry can  be  overridden
       on  the command line or by use of the `g' command. When partitioning an
       empty large modern disk, picking 255  heads  and  63  sectors/track  is
       always  a  good idea.  There is no need to set the number of cylinders,
       since cfdisk knows the disk size.

       Next, cfdisk tries to read the current partition table  from  the  disk
       drive.   If it is unable to figure out the partition table, an error is
       displayed and the program will exit.  This  might  also  be  caused  by
       incorrect  geometry  information,  and can be overridden on the command
       line.  Another way around this problem is with  the  -z  option.   This
       will ignore the partition table on the disk.

       The  main display is composed of four sections, from top to bottom: the
       header, the partitions, the command  line  and  a  warning  line.   The
       header  contains  the  program  name and version number followed by the
       disk drive and its geometry.  The partitions  section  always  displays
       the  current partition table.  The command line is the place where com-
       mands and text are entered.  The available commands  are  usually  dis-
       played  in  brackets.   The  warning  line is usually empty except when
       there is important information to be displayed.  The current  partition
       is  highlighted  with  reverse  video  (or an arrow if the -a option is
       given).  All partition specific commands apply to  the  current  parti-

       The  format  of  the partition table in the partitions section is, from
       left to right: Name, Flags, Partition Type, Filesystem Type  and  Size.
       The  name  is  the partition device name.  The flags can be Boot, which
       designates a bootable partition or NC, which stands for "Not Compatible
       with  DOS  or  OS/2".   DOS,  OS/2 and possibly other operating systems
       require the first sector of the first partition on  the  disk  and  all
       logical partitions to begin on the second head.  This wastes the second
       through the last sector of the first track of the first head (the first
       sector  is  taken by the partition table itself).  cfdisk allows you to
       recover these "lost" sectors with  the  maximize  command  (m).   Note:
       fdisk(8)  and some early versions of DOS create all partitions with the
       number of sectors already maximized.  For  more  information,  see  the
       maximize  command  below.   The partition type can be one of Primary or
       Logical.  For unallocated space on the drive, the  partition  type  can
       also  be  Pri/Log, or empty (if the space is unusable).  The filesystem
       type section displays the name of the filesystem used on the partition,
       if  known.   If  it  is  unknown, then Unknown and the hex value of the
       filesystem type are displayed.  A special case occurs  when  there  are
       sections of the disk drive that cannot be used (because all of the pri-
       mary partitions are used).  When this is detected, the filesystem  type
       is displayed as Unusable.  The size field displays the size of the par-
       tition in megabytes (by default).  It can also display the size in sec-
       tors  and cylinders (see the change units command below).  If an aster-
       isk (*) appears after the size, this means that the  partition  is  not
       aligned on cylinder boundaries.

       The DOS 6.x FORMAT command looks for some information in the first sec-
       tor of the data area of the partition, and treats this  information  as
       more  reliable than the information in the partition table.  DOS FORMAT
       expects DOS FDISK to clear the first 512 bytes of the data  area  of  a
       partition  whenever a size change occurs.  DOS FORMAT will look at this
       extra information even if the /U flag is given -- we  consider  this  a
       bug in DOS FORMAT and DOS FDISK.

       The  bottom  line is that if you use cfdisk or fdisk to change the size
       of a DOS partition table entry, then you must also use dd to  zero  the
       first 512 bytes of that partition before using DOS FORMAT to format the
       partition.  For example, if you were using cfdisk to make a DOS  parti-
       tion table entry for /dev/hda1, then (after exiting fdisk or cfdisk and
       rebooting Linux so that the partition table information is  valid)  you
       would  use the command "dd if=/dev/zero of=/dev/hda1 bs=512 count=1" to
       zero the first 512 bytes of the partition. Note:

       BE EXTREMELY CAREFUL if you use the dd command, since a small typo  can
       make all of the data on your disk useless.

       For  best results, you should always use an OS-specific partition table
       program.  For example, you should make  DOS  partitions  with  the  DOS
       FDISK program and Linux partitions with the Linux fdisk or Linux cfdisk

       cfdisk commands can be entered by pressing the  desired  key  (pressing
       Enter  after  the  command  is  not  necessary).  Here is a list of the
       available commands:

       b      Toggle bootable flag of the current partition.  This allows  you
              to select which primary partition is bootable on the drive.

       d      Delete  the  current  partition.   This will convert the current
              partition into free space and merge it with any free space imme-
              diately  surrounding the current partition.  A partition already
              marked as free space or marked as unusable cannot be deleted.

       g      Change the disk  geometry  (cylinders,  heads,  or  sectors-per-
              track).   WARNING: This option should only be used by people who
              know what they are doing.  A command line option is also  avail-
              able  to  change  the  disk  geometry.  While at the change disk
              geometry command line, you can choose to change  cylinders  (c),
              heads (h), and sectors per track (s).  The default value will be
              printed at the prompt which you can accept  by  simply  pressing
              the  Enter  key, or you can exit without changes by pressing the
              ESC key.  If you want to change the default value, simply  enter
              the  desired  value and press Enter.  The altered disk parameter
              values do not take effect until you return to the main menu  (by
              pressing Enter or ESC at the change disk geometry command line).
              If you change the geometry such that the  disk  appears  larger,
              the  extra  sectors  are  added  at  the end of the disk as free
              space.  If the disk appears smaller,  the  partitions  that  are
              beyond the new last sector are deleted and the last partition on
              the drive (or the free space at the end of the drive) is made to
              end at the new last sector.

       h      Print the help screen.

       m      Maximize disk usage of the current partition.  This command will
              recover the unused space between the  partition  table  and  the
              beginning of the partition, but at the cost of making the parti-
              tion incompatible with DOS, OS/2 and  possibly  other  operating
              systems.  This option will toggle between maximal disk usage and
              DOS, OS/2, etc. compatible disk usage.  The default when  creat-
              ing  a  partition is to create DOS, OS/2, etc. compatible parti-

       n      Create new partition from free space.  If the partition type  is
              Primary  or  Logical,  a partition of that type will be created,
              but if the partition type is Pri/Log, you will be  prompted  for
              the  type  you want to create.  Be aware that (1) there are only
              four slots available for primary partitions and (2) since  there
              can  be  only  one extended partition, which contains all of the
              logical drives, all of the logical  drives  must  be  contiguous
              (with  no  intervening  primary partition).  cfdisk next prompts
              you for the size of the  partition  you  want  to  create.   The
              default size, equal to the entire free space of the current par-
              tition, is displayed in megabytes.  You  can  either  press  the
              Enter  key  to accept the default size or enter a different size
              at the prompt.  cfdisk accepts size  entries  in  megabytes  (M)
              [default],  kilobytes  (K),  cylinders  (C)  and  sectors (S) by
              entering the number immediately followed by one of (M, K,  C  or
              S).  If the partition fills the free space available, the parti-
              tion is created and you are returned to the main  command  line.
              Otherwise,  the partition can be created at the beginning or the
              end of the free space, and cfdisk will ask you to  choose  where
              to  place the partition.  After the partition is created, cfdisk
              automatically adjusts the other partitions' partition  types  if
              all of the primary partitions are used.

       p      Print  the partition table to the screen or to a file. There are
              several different formats for the partition that you can  choose

              r      Raw data format (exactly what would be written to disk)

              s      Partition table in sector order format

              t      Partition table in raw format

              The raw data format will print the sectors that would be written
              to disk if a write command is selected.  First, the primary par-
              tition  table is printed, followed by the partition tables asso-
              ciated with each logical partition.  The data is printed in  hex
              byte by byte with 16 bytes per line.

              The partition table in sector order format will print the parti-
              tion table ordered by sector number.  The fields, from  left  to
              right,  are the number of the partition, the partition type, the
              first sector, the last sector, the offset from the first  sector
              of  the  partition  to  the start of the data, the length of the
              partition, the filesystem type (with the hex value in  parenthe-
              sis),  and  the  flags  (with the hex value in parenthesis).  In
              addition to the primary and logical partitions, free  and  unus-
              able  space  is  printed  and  the extended partition is printed
              before the first logical partition.

              If a partition does not start or end on a cylinder  boundary  or
              if  the  partition length is not divisible by the cylinder size,
              an asterisk (*) is printed after  the  non-aligned  sector  num-
              ber/count.   This usually indicates that a partition was created
              by an operating system that either does not align partitions  to
              cylinder  boundaries or that used different disk geometry infor-
              mation.  If you know the disk geometry of  the  other  operating
              system, you could enter the geometry information with the change
              geometry command (g).

              For the first partition on the disk and for all  logical  parti-
              tions,  if the offset from the beginning of the partition is not
              equal to the number of sectors per track (i.e.,  the  data  does
              not start on the first head), a number sign (#) is printed after
              the offset.  For the remaining partitions, if the offset is  not
              zero, a number sign will be printed after the offset.  This cor-
              responds to the NC flag in the partitions section  of  the  main

              The partition table in raw format will print the partition table
              ordered by partition number.  It will leave  out  all  free  and
              unusable  space.  The fields, from left to right, are the number
              of the partition, the flags (in hex), the starting head,  sector
              and  cylinder, the filesystem ID (in hex), the ending head, sec-
              tor and cylinder, the starting sector in the partition  and  the
              number of sectors in the partition.  The information in this ta-
              ble can be directly translated to the raw data format.

              The partition table entries only have 10 bits available to  rep-
              resent  the starting and ending cylinders.  Thus, when the abso-
              lute starting (ending) sector number is on  a  cylinder  greater
              than 1023, the maximal values for starting (ending) head, sector
              and cylinder are printed.  This is the method used by OS/2,  and
              thus  fixes  the problems associated with OS/2's fdisk rewriting
              the partition table when it is not in this format.  Since  Linux
              and  OS/2 use absolute sector counts, the values in the starting
              and ending head, sector and cylinder are not used.

       q      Quit program.  This will exit the program  without  writing  any
              data to disk.

       t      Change the filesystem type.  By default, new partitions are cre-
              ated as Linux partitions, but since cfdisk can create partitions
              for other operating systems, change partition type allows you to
              enter the hex value of the filesystem you desire.  A list of the
              know  filesystem  types  is  displayed.   You  can  type  in the
              filesystem type at the prompt or accept the  default  filesystem
              type [Linux].

       u      Change  units  of  the  partition  size display.  It will rotate
              through megabytes, sectors and cylinders.

       W      Write partition table to disk (must  enter  an  upper  case  W).
              Since  this might destroy data on the disk, you must either con-
              firm or deny the write by entering `yes' or `no'.  If you  enter
              `yes',  cfdisk  will  write  the partition table to disk and the
              tell the kernel to re-read the partition table  from  the  disk.
              The  re-reading  of  the  partition  table does not work in some
              cases, for example for  device-mapper  devices.   In  particular
              case  you  need  to  inform kernel about new partitions by part-
              probe(8), kpartx(8) or reboot the system.

       Up Arrow

       Down Arrow
              Move cursor to the previous or next  partition.   If  there  are
              more  partitions than can be displayed on a screen, you can dis-
              play the next (previous) set of partitions by moving  down  (up)
              at the last (first) partition displayed on the screen.

       CTRL-L Redraws the screen.  In case something goes wrong and you cannot
              read anything, you can refresh the screen from the main  command

       ?      Print the help screen.

       All of the commands can be entered with either upper or lower case let-
       ters (except for Writes).  When in a sub-menu or at a prompt to enter a
       filename, you can hit the ESC key to return to the main command line.

       -a     Use  an  arrow  cursor instead of reverse video for highlighting
              the current partition.

       -g     Do not use the geometry given by the disk  driver,  but  try  to
              guess a geometry from the partition table.

       -v     Print the version number and copyright.

       -z     Start  with  zeroed partition table.  This option is useful when
              you want to repartition your entire  disk.   Note:  this  option
              does not zero the partition table on the disk; rather, it simply
              starts the program without reading the existing partition table.

       -c cylinders

       -h heads

       -s sectors-per-track
              Override the number of cylinders, heads and  sectors  per  track
              read  from  the  BIOS.   If your BIOS or adapter does not supply
              this information or if it supplies  incorrect  information,  use
              these options to set the disk geometry values.

       -P opt Prints the partition table in specified formats.  opt can be one
              or more of "r", "s" or "t".  See the print command  (above)  for
              more information on the print formats.

       0:  No  errors; 1: Invocation error; 2: I/O error; 3: cannot get geome-
       try; 4: bad partition table on disk.

       fdisk(8), sfdisk(8), mkfs(8), parted(8), partprobe(8), kpartx(8)

       The current version does not support multiple disks.

       Kevin E. Martin (martin@cs.unc.edu)

       The cfdisk command is part of the util-linux-ng package and  is  avail-
       able from ftp://ftp.kernel.org/pub/linux/utils/util-linux-ng/.

The BOGUS Linux Release           3 June 1995                        CFDISK(8)